Webinar – Power Integrity and Sequencing Test
The DC power rail, while necessary to power most of today’s electronics, is often a source of difficulty. Not only are the number of power rails increasing, their operating tolerances are becoming tighter, they have power up/down sequencing requirements, expected efficiencies, and require load stability.
Why is this? Because signal integrity is directly proportional to power rail integrity due to effects like power supply induced jitter (PSIJ). Device functional operation depends on clean, stable power rails.
Power distribution networks are also a large source for EMI/EMC. Increased efficiency is expected whether to improve battery life or to be green. Improved power integrity can help mitigate these issues.
In this webinar, Keysight’s Power Integrity Lead Kenny Johnson will discuss the importance of power integrity related measurements like PDN impedance, power rail integrity, PMIC Power Sequencing, PSRR, control loop response, static/dynamic loads (current), and radiated emission.
Register today and gain more insight in Power Integrity challenges.
Kenny Johnson – Power Integrity Lead – Keysight Technologies
Kenny Johnson is Keysight Technologies Power Integrity lead and the Communication Solutions Groups probe, interconnect and low power measurement expert responsible for project definition and market development in these areas. He has designed logic analyzer and oscilloscope probes, managed hardware, ASIC, and software development and was a marketing product line manager. Kenny has been an HP/Agilent/Keysight employee for 32 years. Before that, he attended Kansas State University where he earned a B.S. in Mechanical Engineering. He holds 25 patents related to electro-mechanical designs.
Link zur Veranstaltungsseite - https://connectlp.keysight.com/LP=20096?elqTrackId=C14B62F748D2045E2F7407122D86F368&elq=ddb63ae4b8b34c80a178e05cded152fe&elqaid=20206&elqat=2&elqCampaignId=