Webinar – Debugging Serial Buses with an Oscilloscope

Anmeldung ist geschlossen
Keysight Technologies

Webinar – Debugging Serial Buses with an Oscilloscope

von Keysight Technologies
324 people viewed this event.

Learn how an oscilloscope can be used to debug serial buses in embedded designs. We will cover how to easily set up serial decode triggering conditions, then capture and analyze buses, including I²C, I²S, UART/RS-232, SPI, USB, and CAN.
Both basic and challenging examples will be covered, including how to trigger on specific error conditions and how to isolate infrequent glitches in serial bus designs.

In this webinar, you’ll learn:

  • Why you should use an oscilloscope to debug serial buses
  • How to trigger, capture, and analyze various packets of your bus
  • How to use various oscilloscope functions to make your decoding process easier
Alan Wadsworth
Product Marketing Manager
Keysight Technologies

Alan Wadsworth is currently responsible for marketing Keysight’s oscilloscope, Pathwave software, semiconductor and power products. Alan has over 30 years of industry experience in both design and test. He is also the author of Keysight’s 277-page Parametric Measurement Handbook.

Alan joined Hewlett Packard in 1991 and worked for five years as the SRAM engineer in HP’s Memory Technology Center, which was part of Corporate Procurement. Prior to that Alan worked as an integrated circuit designer at Signetics/Philips for nine years where he designed circuits in both bipolar and BiCMOS technologies.

Alan holds bachelors and masters degrees in electrical engineering from the Massachusetts Institute of Technology and an MBA from Santa Clara University.


Date And Time

24. Oktober 2019 @ 11:00





Share With Friends